Additive injection system Equalis AIM

A multipoint injection system

The Equablend MPA injector controller is capable of controlling anything between 1 and 12 AIM additive injector blocks simultaneously or individually in any combination. MPA can accept pulses from the most basic of mechanical counters to today's sophisticated flow computer.

Sectors of application: 
Additive injection during fuels truck loading
Additives injection during preparation of aviation fuels
Colouring and marking of heating oils and taxes reduced fuels
Denaturizing of alcohol during biofuel preparation
Key Points: 
Complete set of injection monitoring alarms including over / under injection alarm, no additive alarm and leaking solenoid alarm
Function « clean start / clean stop » in order to prevent any additive mixture
1-12 additive injectors simultaneously or independantly controlled
Additive injection module with integral stainless steel strainer, outlet check valves, solenoid valves, oval gear meter
Comprehensive additives injection system compatible with most existing meters fitted with pulses transmitter
Automatic calibration of the additives metersnt
Display of additive(s) and main product volumes
Display of additives concentrations (ppm)olumes
Direct communication with Terminal Automation System
Operates as stand-alone unit or supervised by TAS
Main technical data: 
Meter accuracy < ± 0,5 % @ 3 mPa.s
Repeatability < ± 0,25 %
Injection flow rate : 0.01 L/mn to10 L/mn